BERGERPSS8PSS10测试仪维修销售二手供应射频电源维修销售

本商品属于电源测试设备类，下面详细介绍本产品具体参数，包括频率范围适用范围等详细说明，图文说明帮助您详细了解BERGERPSS8PSS10测试仪维修销售二手供应射频电源维修销售的产品优点。

德国BERGER测试仪维修 BERGER PSS8维修 PSS10维修, BERGER产品亚太(上海/深圳/香港)维修中心, Modul Flasher PSS 8 The Standard Flasher PSS 8 is a high-power flasher for pulsed solar simulation with constant light usable for up to 10 ms. It is built for test surfaces of up to 2.4 m diagonal and has a repetition rate up to 0.5/min. High-power flasher for pulsed solar simulation Constant light usable for up to 10 msec. Powerlevel variable 500 - 1100W/m2 Non uniformity of irradiance < ±2% For test surface of up to 2.4 m diagonal Spectrum AM 1.5 Repetion rate up to 0.5/min String Flasher PSS 10-S The PSS 10-S Pulsed Solar Simulator for solar cells can also directly measure shunt resistance (RSH), an indication of wafer damage. If the value for Rsh is too high, it can lead to hot spots in modules, as if the cell was shaded. Rsh could also be calculated using software, which would not be so accurate. also available for small modules and sunslates For test surface of up to 0.5 m diagonal or 1.8 m x 0.2 m Non uniformity of irradiance < ± 2% Two step illumination in one flash discharge 1000W/m2, directly followed by 500W/m2 illumination Constant light per step usable for up to 5 msec. Spectrum AM 1.5 Repetition rate up to 10/min Single Cell Flasher PSS 10 The Single Cell Flasher PSS 10 and the PSS 10-S have special high-stability capacitors for permanent use in fully automatic assembly lines. They flash once for each cell, but measure it twice. The low-pressure xenon lamp generates a two-step single flash, which leads to two I-V curves. Beginning at a light intensity of 1,000 W/m2, it drops after a flash period of 5 ms to an intensity of 500W/m2 for another 5 ms. This allows the correct measurement of the series resistance (Rs) according to the norm IEC 904-9 (Simulator Class A). Special high-power capacitors 1000W/m2, directly followed by 500W/m2 illumination For permanent use in fully automatic assembly lines Two step illumination in one flash discharge Constant light per step usable for up to 5 msec. Non uniformity of irradiance < ±1% For test surface of up to 0.3 m diagonal Spectrum AM 1.5 Repetition rate up to 20/min

以上信息便是广州市伊恩埃半导体技术有限公司发布的关于BERGERPSS8PSS10测试仪维修销售二手供应射频电源维修销售的全部信息，产品价格为50000.00元，更多此类产品信息，请持续关注发布猫。