同轴数字光纤转模拟音频LR转换器SPDIF数字音频解码/光纤转换3.5

产品参数说明

数字模拟音频转换器是专为家庭音响或专业音频切换。通过与外部设备连接，可以把同轴或光纤数字音频信号转换成模拟R/L声道音频信号输出。该转换器的体积小，安装简单。 产品参数： 输入：同轴或光纤数字音频 输出：R/L(音频输出连接器) 音频输入连接：Toslink，1xRCA（同轴) 音频输出连接：2xRCA（右/左） 注意事项:请正确使用并妥善保养，以***产品性能以及正常工作。1.   要远离潮湿、高温、多尘、腐蚀性及氧化性气体环境以免损坏。2.   所有部件应避免强烈振动，不得碰撞、敲击、跌摔，以免损坏。 3.   请勿用湿手接触本机电源适配器插头4.   从电源插座上拔掉适配器插头时,请握住插头,不要拉电源线.5.   机器不用时请关掉电源(长期不用时请拔掉电源适配器插头)6.   请勿开启机盖,切勿接触机内任何器件.7.   必须使用厂家提供或经厂家***的电源适配器

Digital to analog audio converter

 

 

Thank you for purchasing this audio converter.for optimum performance and safety,please read tions carefully before connecting,operating or adjusting this product.please keep this manual for r home or professional audio switching.

INTRODUCTION

This digital to analog audio converter is designed for either home or professional audio switching.it converts coaxial or toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks.this converter is small in size and quite easy to install.

FEATURES

This converter has many features that enable it to perform in a superior manner.among hose features you will find:

converts coaxial or toslink digital audio signals to analog L/R audiosupports sampling rate at 32, .44.1,48 and 96KHZ24-bit S/ PDIF incoming bit stream on left and right channelsProvides electromagnetic-noise-free transmissionEasy to install and simple to operate

SPECIFICATIONS

Signal inputs/output
Input audio	Coaxial or toslink digital audio
Output audio	L/R audio
connector
Input audio connector	TOSLINK,1XRCA(coaxial)
Output auordio connect	2X RCA (R/L)
Sampling rate	32,44.1,48 and 96KHZ
mechanical
Size(L-W-H)	51x41x26mm
Weight(net)	78g
warranty
Limited warranty	1 year parts and labor
Environmental
Operating temperature	0℃to +70℃
Operating humidity	10% to 85% RH(no condensation)
Storage remperature	-10℃to +80℃
Storage humidity	5% to 90% RH(no condensation)
Power requirement
External power supply	5V DC @2A
Power consumption	0.5 watts(max)
Regulatory approvals
Converter unit	FCC, CE ,UL
Power supply	UL CE,FCC
Accessories adapter
AC power adapter	US standard,UK standard and so on.
Uer manual	English version

 

PACKAGE CONTENTS

Before attempting to nit,use this unit,plea packaging and make sure the following items are contained in the shipping carton.

main unit(digital to analog audio converter).5V DC Power supplyUser,s manual

PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the signal input(s),output(s)and power requirements.

 

CONNECTION AND OPERATION

Before installation,please make sure all devices you wish to connect have been turned off .

connect the audio source device to the converter using appropriate toslink or coaxial nnect the A/V receivers or amplifiers to the converter using appropriate R/L cable.Insert the DC side of 5v power product supply into the converter and then connect the AC side of the power supply into the wall outlet.

NOTE:when connected to the toslink and coaxial cable at the same time.the product will give prority to toslink input.